Bin Configuration
Click any bin on the 2D grid or in the sidebar list to select it and open the configurator panel.
Parameters
Dimensions
| Parameter | Range | Default | Description |
|---|---|---|---|
| Width (W) | 1–10 | 1 | Width in grid units (42mm each) |
| Depth (D) | 1–10 | 1 | Depth in grid units |
| Height (H) | 1–12 | 3 | Height units (7mm each) |
Geometry
| Parameter | Range | Default | Description |
|---|---|---|---|
| Corner radius | 0–3.75 mm | 3.75 mm | Body only; feet and sockets retain fixed mating radii |
| Wall thickness | 0.4–3.0 mm | 1.2 mm | Outer wall thickness |
| Bottom thickness | 0.4–3.0 mm | 0.8 mm | Floor thickness |
Features
| Feature | Description |
|---|---|
| Stacking lip | +3.8mm printed rim with its own female mating profile |
| Label shelf | 45-degree angled shelf on the front wall for label strips |
| Label width | Requested shelf width; limited by cavity height to protect the floor and feet on shallow bins |
| Magnets | Four recesses per cell; default nominal 6 × 2 mm magnets produce 6.5 × 2.4 mm holes |
| Screws | M3 clearance holes at corners for screw retention (4 per cell unit) |
| Dividers X | Vertical dividers (0–9), equispaced wall-to-wall |
| Dividers Y | Horizontal dividers (0–9), equispaced wall-to-wall |
Appearance
| Parameter | Description |
|---|---|
| Color | Bin color (affects 2D grid display and 3D preview) |
| Label | Text label displayed on the bin in the 2D grid |
| Group | Assign to a group for organization (Screws, Tools, Cables, etc.) |
Real-World Dimensions
The configurator shows computed real-world dimensions:
- Outer size:
W × 42mm - 0.5mm toleranceper axis - Total height:
H × 7mm + (stacking lip ? 3.8mm : 0); the base is included
For example, a 2x2x3u bin measures 83.5 × 83.5 × 21.0mm, or 24.8mm high with a stacking lip. Check the fit test before a full print.
The magnet inputs specify the nominal magnet size, not the finished hole size: the generator adds 0.5 mm to diameter and 0.4 mm to depth. Large custom holes can shift their centres inward. See hardware dimensions and limitations; do not assume every custom magnet size matches a standard magnetic baseplate.